DiveAlert
DiveAlert is a specially designed, small, light weight air horn that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator and buoyancy compensator. Installation is easy and only takes a moment.
Why have DiveAlert? What would you do in a diving emergency if you needed to get the attention of the pick-up boat or someone else on the water’s surface? Before DiveAlert SCUBA divers had relied on whistles or a SMB (surface marker buoy) as their only signaling devices in such an emergency. But if the diver is disabled and can’t blow into a whistle (or deploy the SMB) the whistle makes no sound at all. Or if the boat operator is not looking in the direction of a diver with a SMB deployed (IF the diver was able to even deploy the SMB) the diver goes un-noticed.
In contrast, DiveAlert enables divers at a mere touch of a button to generate a blast of sound that can be heard up to a mile away.
DiveAlert does not require any modification of your other equipment and it does not interfere with the normal operation of your equipment.
When you need to get someone’s attention on the water’s surface you simply press a button and DiveAlert uses a small amount of air from your SCUBA tank to make a piercingly loud sound.
DiveAlert, the most effective and convenient surface signaling device available.
Effective Air Horn
DiveAlert uses a small amount of air from your SCUBA tank to make a piercingly loud sound. People have been able to hear a DiveAlert one mile away from diver in need. In conditions where visibility is limited, a DiveAlert can a life saver.
No Modification Required
DiveAlert does not require any modification to your equipment, and it does not interfere in any way with the normal operation of your equipment. The DiveAlert Plus comes in three different models to accomodate different connectors.DA1 - All Standard Inflators
DA2 - SeaQuest AirSource 1&2, Zeagle OctoPlus,
Oceanic Air XS & MARES AirControl
And Now: New AirSource 3 QD
DA3 - ScubaPro Air 2, Tusa Duo-Air Atomic SS1,
Sherwood Gemini & Zeagle Octo-Z
Easy to Use Design
DiveAlert does not require any modification of your other equipment, and it does not interfere in any way with the normal operation of your other equipment.
Low Maintenence
After each use, your DiveAlert should be pressurized and rinsed with fresh water with the rest of your gear. Make sure that before every dive you check that DiveAlert is installed correctly and functioning properly. When testing, be careful not to point DiveAlert toward yourself or toward anyone else or loss of hearing could result.
How it Works
The DiveAlert uses chrome-plated brass couplings to attach to your power inflator. The activator button engages a chrome-plated brass actuator valve stem causing a small amount of air to rush by a stainless steel diaphragm, emitting a piercingly loud sound from the injection-molded thermoplastic body.